Basic Guide to Finding Hidden Valves and Piping

If you are a homeowner then you need to know the details of your home like the back of your hand. It is important to ensure that you are keen as well and are able to know where things like gas piping as well as valves are so that you are able to switch them off in case of an emergency. There are various ways that you can be able to do that and some of the ways that you can be able to ensure that you do that are briefly highlighted below.

There is a high probability that the the gas valves for your home will be located before the gas meter in case you have natural gas. For the most part, most of the nubs are usually rectangular in shape and are opened using a wrench but most gas companies usually recommend that you do not touch them. If you are looking for a second valve, then you are most likely to find it down the line or where the gas pipe enters.

If you have a gas pipe then the valve will most likely be located in the utility room and will be made from flexible copper. If you find such a piping in your home then you are sure that you have a really high pressure gas system. With the gas system, you are sure that you will find the shut off valve near the water heater or somewhere near the furnace.

For water meters, you are likely to get that you have two shutoff valves one before and the other after the meter. In environments where it is really cold you are most likely to get the shut off points located in the house to prevent freezing. The shut off valve is most likely to be located in an underground box or lid next to exterior wall if you live in milder climates.

In case you are finding it hard to locate the water shut off valve then it is important for you to look at the property report that was given to you during the last phase of the property purchase. When you look at the report, you are sure that you will be able to find out where the valve is located. There is also a high probability that the picture of what the valve looks like will be drawn so that you are able to know what it looks like.

Automatic valves for your sprinkler system may in most cases be located underground and are usually harder to find as you read more from this website. By using a metal detector, you are sure that you will be able to find such valves since they are usually made up of metals. Even though such valves may not be located exactly where the plans says using the plans is something that will definitely help you to find out where you need to start.